เขียนวันที่

LOFSORB

LOFSORB

LOFSORB activated carbon filter cartridges have a high adsorption capacity, allowing the filter cartridges to efficiently remove unwanted free chlorine and organic from water or other liquids.

Eaton’s LOFSORB filter cartridges are suitable for the filtration of potable water, spirits, water based and organic solvents (for removal of colour, smell and taste contamination), galvanic bath (removal of organic contamination from nickel and copper baths).

FILTER MATERIAL

Activated carbon block

 
 
 

RETENTION

Nominal

 

MAX. OPERATING TEMPERATURE

126 °F (52 °C)

 

Core features

  • Economical alternative to granular carbon cartridges
  • Pressed and extruded underhigh pressure
  • Prevent carbon particles passing into the filtrate
  • Excellent adsorption characteristics for chlorine and organic compounds
FILTER MATERIALActivated carbon block
RETENTION RATINGType 01/04: 1, 5, 10 Type 02: 5 (µm)
RETENTION EFFICIENCYNominal
LENGTHS (NOMINAL)4.875″, 5″, 9.75″, 20″, 30″ (type 01)
5”, 9.75”, 10”, 20”, 30” (type 02)
9.75″, 20″ (type 04)
ADAPTER CODE()
INNER CORE–
END CAPSEthylene-octene copolymer
(type 01/04),
polypropylene (type 02)
CAGESPolypropylene fleece and net
MAX. OPERATING TEMPERATURE126 °F (52 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

101 psid (7 bar) (type 01/04)
36 psid 2.5 bar (type 02)

เขียนวันที่

LOFPLEAT HF G

LOFPLEAT HF G

LOFPLEAT HF-G filter cartridges are designed with pleated micro fiberglass filter material construction to provide a high total surface area. A single LPHF-G filter cartridge can replace several standard cartridge elements. Change-outs are quick and easy. Unlike standard design filter cartridges, the flow is inside out. The result is higher dirt-holding capacity. 

Eaton’s LOFPLEAT HF-G filter cartridges can be used in a variety of applications where high flow capacity is required including fuel oils, chemicals, petrochemicals, solvents and oil and gas.

FILTER MATERIAL

Fiberglass

 
 

RETENTION

99.9% efficiency

 

MAX. OPERATING TEMPERATURE

Polypropylene: 180°F (82°C); Polyacetal: 230°F (110°C)

 

Core features

  • Higher flow capacity reduces required number of filter cartridges
  • Lower initial costs with smaller filter housings
  • Less labor required for change-outs
  • Available with absolute rated filter material at 1 to 20 μm retention ratings
  • Inside-out flow for greater dirt holding capacity
  • Capable of flow rates up to 1892.5 l/min in a single 60" length
  • Can be retrofitted in most competitive high-flow housings
  • Thermally bonded construction
FILTER MATERIALFiberglass
RETENTION RATING1, 2.5, 4.5, 10, 20 (µm)
RETENTION EFFICIENCY99.9%
LENGTHS (NOMINAL)20″, 40″, 60″
ADAPTER CODES–
INNER CORE–
END CAPSPolypropylene or polyacetal
CAGESPolypropylene or polyacetal
MAX. OPERATING TEMPERATUREPolypropylene: 180 °F (82 °C)
Polyacetal: 230 °F (110 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

Polyacetal: 75 psid at 70 °F (5.2 bar at 21 °C)
50 psid at 230 °F (3.4 bar at 110 °C)
Polypropylene: 50 psid at 77 °F (3.4 bar at 25 °C)
20 psid at 180 °F (1.4 bar at 82 °C)

เขียนวันที่

LOFPLEAT HF

LOFPLEAT HF

LOFPLEAT-HF cartridges are designed with pleated media construction to provide high total surface area. A single LPHF cartridge can replace several standard cartridge elements. High-flow capacity in a single cartridge leads to quicker and easier changeouts. Unlike standard design cartridges, the flow is inside out. The result is higher debris-holding capacity.

LOFPLEAT-HF from Eaton can be used in a variety of applications where high flow capacity is required including food and beverage, chemical and water systems

FILTER MATERIAL

Polypropylene

 
 

RETENTION

99.9% efficiency

 

MAX. OPERATING TEMPERATURE

176 °F (80°C)

 

Core features

  • Higher flow capacity reduces required number of cartridges
  • Lower initial costs with smaller filter housing
  • Less labor required for changeouts
  • Available with absolute rated media at 1, 5, 10, 20 μm retention levels
  • Inside-out flow for greater dirt holding capacity
  • Capable of flow rates up to 1,892.5 l/min in a single 60" length
  • Can be retrofitted in most competitive high-flow housings
  • FDA lilsted (U.S. CFR, Title 21) materials of construction for food and beverage contact
FILTER MATERIALPolypropylene
RETENTION RATING1, 5, 10, 20(µm)
RETENTION EFFICIENCY99.9%
LENGTHS (NOMINAL)20″, 40″, 60″
ADAPTER CODES–
INNER CORE–
END CAPSPolypropylene
CAGESPolypropylene
MAX. OPERATING TEMPERATURE176 °F (80 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

43 psid at 70 °F (3.0 bar at 21 °C)

เขียนวันที่

LOFPLEAT GG

LOFPLEAT GG

The pleated borosilicate micro fiberglass filter cartridges are disposable, highly efficient and can be effectively used in a variety of industrial applications. They offer a high surface area for high flow rates.

Eaton’s LOFPLEAT GG filter cartridges are suitable for the filtration of magnetic tape coatings and as a blow-down, post filter. They are also widely used in the chemical, ink, and oil and gas industries. 

FILTER MATERIAL

Fiberglass

 
 

RETENTION

90% efficiency

 

MAX. OPERATING TEMPERATURE

176 °F (80 °C)

 

Core features

  • High-efficiency cartridge offering standardized pore size
  • High dirt holding and flow capability
  • Reduced labor costs due to less change-outs
  • Fixed pore structure prevents dirt unloading even at maximum differential pressure
FILTER MATERIALFiberglass
RETENTION RATING0.45, 1, 3, 10 (µm)
RETENTION EFFICIENCY90%
LENGTHS (NOMINAL)10“, 20“, 30“, 40“
ADAPTER CODESDOE, 1, 2, 3, 4, 10, 20, 28
INNER COREPolypropylene
END CAPSPolypropylene
CAGESPolypropylene
MAX. OPERATING TEMPERATURE176 °F (80 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

58 psid at 70 °F (4.0 bar at 21 °C)
35 psid at 176 °F (2.4 bar at 80 °C)

เขียนวันที่

LOFPLEAT EE

LOFPLEAT EE

Pleated polypropylene filter cartridges for pre or final filtration.

This disposable filter element can be used for a wide range of applications. The pleated polypropylene filter material provides a large filtration surface area, which allows for maximized flow rate in the system.

Eaton’s LOFPLEAT EE all-polypropylene filter cartridges with an economically efficient design are suitable for a wide range of process applications.

FILTER MATERIAL

Polypropylene

 
 

RETENTION

90% efficiency

 

MAX. OPERATING TEMPERATURE

176 °F (80 °C)

 

Core features

  • Filtration efficiency of 90%
  • Retention ratings from 0.2 to 25 μm
  • Available in lengths up to 40"
  • Pore structure design resists dirt unloading
  • Polypropylene construction and multiple gasket/O-ring options for broad application range
FILTER MATERIALPolypropylene
RETENTION RATING0.2, 0.45, 1, 5, 10, 25 (µm)
RETENTION EFFICIENCY90%
LENGTHS (NOMINAL)10”, 20”, 30”, 40”
ADAPTER CODESDOE, 1, 2, 3, 4, 10, 20, 28
INNER COREPolypropylene
END CAPSPolypropylene
CAGESPolypropylene
MAX. OPERATING TEMPERATURE176 °F (80 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

58 psid at 70 °F (4.0 bar at 21 °C)
35 psid at 176 °F (2.4 bar at 80 °C)

เขียนวันที่

LOFPLEAT CP

LOFPLEAT CP

LOFPLEAT CP filter cartridges are high efficiency, high performance filter elements. Constructed with a large surface, melt-blown polypropylene media they provide a high dirt holding capacity with low initial differential pressure.

Eaton’s absolute rated LOFPLEAT CP filter cartridges are suitable for a wide range of process applications, including RO prefilters, chemicals, wastewater and many more.

 

FILTER MATERIAL

Polypropylene

 
 

RETENTION

99.98% efficiency

 

MAX. OPERATING TEMPERATURE

176 °F (80 °C)

 

Core features

  • High surface area for increased flow and dirt holding capacity
  • 10.7m² of surface ares per 39" length
  • Long service life provides low cost change-out benefits
  • Polypropylene construction for use in a variety of fluids
FILTER MATERIALPolypropylene
RETENTION RATING1, 5, 10, 20, 40, 70(µm)
RETENTION EFFICIENCY99.98%
LENGTHS (NOMINAL)40”, 60”
ADAPTER CODE–
INNER COREPolypropylene
END CAPSPolypropylene
CAGESPolypropylene
MAX. OPERATING TEMPERATURE176 °F (80 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

50.7 psid at 77 °F (3.5 bar at 25 °C)

เขียนวันที่

LOFPLEAT AG

LOFPLEAT AG

Get absolute efficiency with this cost-effective all polypropylene cartridge. The pleated design provides a large surface area for long lasting filtration efficiency.

Eaton’s LOFPLEAT AG absolute rated filter cartridges are suitable for a wide range of critical process applications.

FILTER MATERIAL

Polypropylene (PP)

 
 

RETENTION

99.98% efficiency

 

MAX. OPERATING TEMPERATURE

176 °F (80 °C)

 

Core features

  • Fits broad application range with 0.2 to 50 μm retention rating
  • Beta rating of 5000, 99.98% efficiency
  • High flow and long service life for minimum maintenance
  • Available in continuous lengths up to 40 inches
  • Eliminates dirt unloading at high differential pressures due to fixed pore structure
FILTER MATERIALPolypropylene
RETENTION RATING0.2, 0.45, 1, 5, 10, 25, 50 (µm)
RETENTION EFFICIENCY99.98%
LENGTHS (NOMINAL)10“, 20“, 30“, 40“
ADAPTER CODESDOE, 1, 2, 3, 4, 10, 20, 28
INNER COREPolypropylene
END CAPSPolypropylene
CAGESPolypropylene
MAX. OPERATING TEMPERATURE176 °F (80 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

58 psid at 70 °F (4.0 bar at 21 °C)
35 psid at 176 °F (2.4 bar at 80 °C)

เขียนวันที่

LOFMET

LOFMET

Porous titanium or stainless steel 316 filter cartridges are designed for applications involving extreme operating conditions and aggressive fluids and gases. The rugged, fixed pore structure is constructed from sintered titanium powder. The result is a filter element that can withstand heat, high pressures and repeated cleaning/backwash cycles. Mechanical strength and corrosion resistance are the results of a seamless design.

Eaton’s LOFMET filter cartridges are designed for a variety of applications including corrosive liquids and gases, cryogenic fluids, high viscosity solutions, process steam, high temperature liquids and gases and catalyst recovery.

FILTER MATERIAL

Titanium and stainless steel 316

 
 

RETENTION

99.5% efficiency

 

MAX. OPERATING TEMPERATURE

700 °F (371 °C)

 

Core features

  • High corrosion resistance
  • All sintered titanium or stainless steel 316 construction
  • Backwashable for reuse and maximum economy
  • Multiple end configurations and gasket/o-rings to fit most filter housings
FILTER MATERIALTitanium and stainless steel 316
RETENTION RATING0.5, 1, 5, 10, 15, 35, 50, 100 (µm)
RETENTION EFFICIENCY99.5%
LENGTHS (NOMINAL)5″, 9.75″, 10″, 20″, 30″, 40″
ADAPTER CODEDOE, 1, 4, M1, M2
INNER CORE–
END CAPSTitanium and stainless steel 316
CAGES–
MAX. OPERATING TEMPERATURE700 °F (371 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

250 psid (17.4 bar)

เขียนวันที่

LOFMEM W

LOFMEM W

LOFMEM W membrane filter cartridges use absolute rated polypropylene and polyethersulfone components that are both hydrophilic and asymmetric. Engineered specifically for economical overall filtration, they offer superior flow rates and throughputs.

Polypropylene membrane absolute rated filter cartridges are the preferred choice for general water filtration, as a DI water prefilter/postfilter and for use in aqueousbased chemical processing.

FILTER MATERIAL

Polyethersulfone (PES)

 
 

RETENTION

Absolute

 

MAX. OPERATING TEMPERATURE

180 °F (82 °C)

 

Core features

  • High dirt-holding provides long service life and reduced maintenance requirements
  • Economic absolute filtration
  • All-thermal bonded construction, no adhesives
  • No wetting agents
  • Available in multiple configurations
FILTER MATERIALPolyethersulfone (PES)
RETENTION RATING10.05, 0.1, 0.2, 0.45, 0.65 (µm)
RETENTION EFFICIENCYAbsolute
LENGTHS (NOMINAL)10“, 20“, 30“, 40“
ADAPTER CODESDOE, 1, 2, 3, 4, 20
INNER COREPolypropylene
END CAPSPolypropylene
CAGESPolypropylene
MAX. OPERATING TEMPERATURE180 °F (82 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

60 psid at 80 °F (4.1 bar at 27 °C)
30 psid at 160 °F (2.0 bar at 71 °C)
15 psid at 200 °F (1.0 bar at 93 °C)

เขียนวันที่

LOFMEM TFA

LOFMEM TFA

LOFMEM TFA membrane filter cartridges uses absolute rated PTFE membrane combined with PTFE support layers and PFA hardware to create a fluoropolymer pleated cartridge filter suitable for use in the most demanding environments. LOFMEM TFA is manufactured without the use of glues, adhesives or wetting agents, ensuring high purity in every application.

Absolute rated PTFE membrane filter cartridges are designed to resist the most severe chemical exposure environments, making them the preferred choice for demanding high temperature and chemical process applications. LOFMEM TFA is designed for use with strong acids, bases, organic chemicals and oxidizers.

 

FILTER MATERIAL

PTFE membrane

 
 

RETENTION

Absolute

 

MAX. OPERATING TEMPERATURE

338 °F (170 °C)

 

Core features

  • PTFE membrane
  • Superior chemical resistance
  • Absolute rated filtration
  • All-thermal bonded construction, no adhesives
  • No wetting agents
  • Available in multiple configurations
FILTER MATERIALPTFE membrane
RETENTION RATING0.1, 0.2, 0.45, 1(µm)
RETENTION EFFICIENCYAbsolute
LENGTHS (NOMINAL)10“, 20“, 30“, 40“
ADAPTER CODE4
INNER COREPFA
END CAPSPFA
CAGESPFA
MAX. OPERATING TEMPERATURE338 °F (170 °C)
MAX. PRESSURE DIFFERENCE IN FLOW DIRECTION

NA